Network Security Architect

[PDF and VCE] Format for Free NSE7_SAC-6.2 Dumps With Exam Questions Download

Attention please! Here is the shortcut to pass your Jul 03,2022 Latest NSE7_SAC-6.2 exam questions exam! Get yourself well prepared for the Network Security Architect Hotest NSE7_SAC-6.2 pdf Fortinet NSE 7 – Secure Access 6.2 exam is really a hard job. But don’t worry! We We, provides the most update NSE7_SAC-6.2 new questions. With We latest NSE7_SAC-6.2 pdf, you’ll pass the Network Security Architect Newest NSE7_SAC-6.2 pdf Fortinet NSE 7 – Secure Access 6.2 exam in an easy way

We Geekcert has our own expert team. They selected and published the latest NSE7_SAC-6.2 preparation materials from Official Exam-Center.

The following are the NSE7_SAC-6.2 free dumps. Go through and check the validity and accuracy of our NSE7_SAC-6.2 dumps.Do you what to see some samples before NSE7_SAC-6.2 exam? Check the following NSE7_SAC-6.2 free dumps or download NSE7_SAC-6.2 dumps here.

Question 1:

Which two EAP methods can use MSCHAPV2 for client authentication? (Choose two.)

A. PEAP

B. EAP-TTLS

C. EAP-TLS

D. EAP-GTC

Correct Answer: AC

Reference: https://help.fortinet.com/fauth/3-3/Content/FortiAuthenticator 3_3 Admin% 20Guide/500/501_EAP.htm


Question 2:

802.1X port authentication is enabled on only those ports that the FortiSwitch security policy is assigned to.

Which configurable items are available when you configure the security policy on FortiSwitch? (Choose two.)

A. FSSO groups

B. Security mode

C. User groups

D. Default guest group

Correct Answer: BC


Question 3:

A wireless network in a school provides guest access using a captive portal to allow unregistered users to self-register and access the network. The administrator is requested to update the existing configuration to provide captive portal authentication through a secure connection (HTTPS) to protect and encrypt guest user credentials after they receive the login information when registered for the first time.

Which two changes must the administrator make to enforce HTTPS authentication? (Choose two.)

A. Provide instructions to users to use HTTPS to access the network.

B. Create a new SSID with the HTTPS captive portal URL.

C. Enable Redirect HTTP Challenge to a Secure Channel (HTTPS) in the user authentication settings

D. Update the captive portal URL to use HTTPS on FortiGate and FortiAuthenticator

Correct Answer: BD


Question 4:

An administrator is deploying APs that are connecting over an IPsec network. All APs have been configured to connect to FortiGate manually. FortiGate can discover the APs and authorize them. However, FortiGate is unable to establish CAPWAP tunnels to manage the APs.

Which configuration setting can the administrator perform to resolve the problem?

A. Decrease the CAPWAP tunnel MTU size for APs to prevent fragmentation.

B. Enable CAPWAP administrative access on the IPsec interface.

C. Upgrade the FortiAP firmware image to ensure compatibility with the FortiOS version.

D. Assign a custom AP profile for the remote APs with the set mpls-connectionoption enabled.

Correct Answer: B


Question 5:

Refer to the exhibit.

A host machine connected to port2 on FortiSwitch cannot connect to the network. All ports on FortiSwitch are assigned a security policy to enforce 802.1X port authentication. While troubleshooting the issue, the administrator runs the debug command and obtains the output shown in the exhibit.

Which two scenarios are the likely cause of this issue? (Choose two.)

A. The host machine is not configured for 802.1X port authentication.

B. The host machine does not support 802. 1X authentication.

C. The host machine is quarantined due to a security incident.

D. The host machine is configured with wrong VLAN ID.

Correct Answer: AB

Reference: https://kb.fortinet.com/kb/documentLink.do?externalID=FD46428


Question 6:

What action does FortiSwitch take when it receives a loop guard data packet (LGDP) that was sent by itself?

A. The receiving port is shut down.

B. The sending port is shut down

C. The receiving port is moved to the STP blocking state.

D. The sending port is moved to the STP blocking state

Correct Answer: B

Reference: https://www.scribd.com/document/468940309/Secure-Access-6-0-Study-Guide-Online-pdf


Question 7:

Default VLANs are created on FortiGate when the FortiLink interface is created. By default, which VLAN is set as Allowed VLANs on all FortiSwitch ports?

A. Sniffer VLAN

B. Camera VLAN

C. Quarantine VLAN

D. Voice VLAN

Correct Answer: A


Question 8:

What does DHCP snooping MAC verification do?

A. Drops DHCP release packets on untrusted ports

B. Drops DHCP packets with no relay agent information (option 82) on untrusted ports

C. Drops DHCP offer packets on untrusted ports

D. Drops DHCP packets on untrusted ports when the client hardware address does not match the source MAC address

Correct Answer: D

Reference: https://docs.fortinet.com/document/fortiswitch/6.4.2/administration-guide/335964/dhcpsnooping (note)


Question 9:

Which statement correctly describes the quest portal behavior on FortiAuthenticator?

A. Sponsored accounts cannot authenticate using guest portals.

B. FortiAuthenticator uses POST parameters and a RADIUS client configuration to map the request to a guest portal for authentication.

C. All guest accounts must be activated using SMS or email activation codes.

D. All self-registered and sponsored accounts are listed on the local Users GUI page on FortiAuthenticator.

Correct Answer: A


Question 10:

Refer to the exhibits.

Examine the firewall policy configuration and SSID settings.

An administrator has configured a guest wireless network on FortiGate using the external captive portal. The administrator has verified that the external captive portal URL is correct. However, wireless users are not able to see the captive portal login page.

Given the configuration shown in the exhibit and the SSID settings, which configuration change should the administrator make to fix the problem?

A. Enable the captive-portal-exemptoption in the firewall policy with the ID 11.

B. Apply a guest.portal user group in the firewall policy with the ID 11.

C. Disable the user group from the SSID configuration.

D. Include the wireless client subnet range in the Exempt Source section.

Correct Answer: C


Question 11:

Refer to the exhibit.

Examine the configuration of the FortiSwitch security policy profile.

If the security profile shown in the exhibit is assigned on the FortiSwitch port for 802.1X.port authentication, which statement is correct?

A. Host machines that do support 802.1X authentication, but have failed authentication, will be assigned the guest VLAN.

B. All unauthenticated users will be assigned the auth-fail VLAN.

C. Authenticated users that are part of the wired-users group will be assigned the guest VLAN.

D. Host machines that do not support 802.1X authentication will be assigned the guest VLAN.

Correct Answer: C


Question 12:

Refer to the exhibit.

Examine the network topology shown in the exhibit.

Which port should have root guard enabled?

A. FortiSwitch A, port2

B. FortiSwitch A, port1

C. FortiSwitch B, port1

D. FortiSwitch B, port2

Correct Answer: A

Reference: https://docs.fortinet.com/document/fortiswitch/6.4.2/administration-guide/364614/spanningtree-protocol


Question 13:

Examine the following RADIUS configuration:

An administrator has configured a RADIUS server on FortiGate that points to FortiAuthenticator. FortiAuthenticator is acting as an authentication proxy and is configured to relay all authentication requests to a remote Windows AD server using LDAP.

While testing the configuration, the administrator notices that the diagnose test authservercommand works with PAP, however, authentication requests fail when using MSCHAPv2.

Which two changes should the administrator make to get MSCHAPv2 to work? (Choose two.)

A. Force FortiGate to use the PAP authentication method in the RADIUS server configuration.

B. Change the remote authentication server from LDAP to RADIUS on FortiAuthenticator.

C. Use MSCHAP instead of using MSCHAPv2

D. Enable Windows Active Directory Domain Authentication on FortiAuthenticator to add FortiAuthenticator to the Windows domain.

Correct Answer: BD

Reference: https://docs.fortinet.com/document/fortiauthenticator/6.0.0/administration-guide/641286/ remote-authentication-servers


Question 14:

Refer to the exhibit.

Examine the partial debug output shown in the exhibit.

Which two statements about the debug output are true? (Choose two.)

A. The connection to the LDAP server timed out.

B. The user authenticated successfully.

C. The LDAP server is configured to use regular bind.

D. The debug output shows multiple user authentications.

Correct Answer: BC


Question 15:

Which CLI command should an administrator use to view the certificate validation process in real-time?

A. diagnose debug application certd -1

B. diagnose debug application fnbamd -1

C. diagnose debug application authd -1

D. diagnose debug application foauthd -1

Correct Answer: B